MRP-299 Insignia Red (FS 11136 – ANA 509)
MRP-299 Insignia Red (FS 11136 – ANA 509)
MRP MR. Paint, Insignia Red (FS 11136 – ANA 509) MRP-299
30ml Bottle
Mr. PAINT is an acrylic pigmented lacquer paint ready to airbrush straight from the bottle. They have excellent coverage, fast drying and colouration. For best results spays multiple thin layers. Spraying between 10 and 25 PSI over primer. Don’t apply wet or heavy coats
If you need to thin this paint you can use Mr. PAINT thinner or Mr Hobby color/levelling thinner.
For clean up, you can use MRP Mr. Cleaner, Mr Hobby Mr Color Thinner, Mr Tool Cleaner R or any other lacquer based cleaners.
LACQUER HARMFUL, WEAR RESPIRATOR & GLOVES AT ALL TIMES
KEEP OUT OF CHILDREN'S REACH
FLAMMABLE, KEEP AWAY FROM HEAT SOURCES
HIQ Parts Scribing Guide Tape is a thick solid tape that easily conforms to curves and bends and is ideal for all those tricky scribing jobs. Rubs down and lifts off easily without leaving residue on your model.
3mm X 30 meter roll. Also available in 6mm.
HIQ Parts Scribing Guide Tape is a thick solid tape that easily conforms to curves and bends and is ideal for all those tricky scribing jobs. Rubs down and lifts off easily without leaving residue on your model.
6mm X 30 meter roll. Also available in 3mm.
HIQ Parts, Scribing Guide Tape Hard 3mm
Manufactured in a fluorescent colour that is easy to see on a model.
Because the tape is made of a thick, hard PVC material with a strong adhesive back, it is suitable for scribing guide tape, but it takes time to peel off the release film on the backside because it is not the original application. If it doesn't peel off well, use precise tweezers.
Compared to the normal version of the transparent guide tape, the adhesive strength is stronger, but it does not stick if there is grease or dust on the model, cleaning and degrease before application.
In addition, because the adhesive strength is strong when peeled off after use on the painted surface, the surfacer and paint may peel off, or if left stuck for a long period of time, it may leave glue marks.
For use on plastic only, do not use on paint.
HIQ Parts, Scribing Guide Tape Hard 6mm
Manufactured in a fluorescent colour that is easy to see on a model.
Because the tape is made of a thick, hard PVC material with a strong adhesive back, it is suitable for scribing guide tape, but it takes time to peel off the release film on the backside because it is not the original application. If it doesn't peel off well, use precise tweezers.
Compared to the normal version of the transparent guide tape, the adhesive strength is stronger, but it does not stick if there is grease or dust on the model, cleaning and degrease before application.
In addition, because the adhesive strength is strong when peeled off after use on the painted surface, the surfacer and paint may peel off, or if left stuck for a long period of time, it may leave glue marks.
For use on plastic only, do not use on paint.
Argofile Japan, MJSK zirconia Ceramic Scraper
Argofile Ceramic Scraper is a large bladed seam line removal tool, simply drag the tool along the seam or glue joint to remove the imperfection. Do not apply too much pressure and try to avoid dropping or knocking the blade, as the ceramic blade may be broken. Please not the ceramic blade is moulded to the handle and can not be changed.
The complete set of all three MRP Mr. Scribers includes Mr. Scriber Narrow, Mr Scriber Wedge and Mr. Scriber Needle
Mr. Scriber Narrow (black) cuts a 0.16 mm grove, Mr. Scriber Wedge (blue) cuts a 0.4 mm grove and Mr. Scriber Needle for curves.
MRP MR. Paint, Mr. Scriber Narrow (Black)
This scriber is ideal for scribing narrow panel lines cutting a 0.16mm grove.
Hold the scriber at a 45-degree angle and apply light pressure while pulling back along the plastic.
MRP MR. Paint, Mr. Scriber Wedge (Blue)
This scriber is ideal for scribing larger panel lines cutting a 0.4mm grove.
Hold the scriber at a 45-degree angle and apply light pressure while pulling back along the plastic.
MRP MR. Paint, Mr. Scriber Needle (Red)
This scriber is ideal for scribing circles, ovals and other shapes.
Hold the scriber at 90 degrees and apply light pressure while pulling along the plastic. We recommend the use of scribing temples for best results when scribing cubicles and ovals.
HIQ Parts Scribing Guide Tape is a thick solid tape that easily conforms to curves and bends and is ideal for all those tricky scribing jobs. Rubs down and lifts off easily without leaving residue on your model.
This bundle includes both 3mm and 6mm rolls each 30 meters long.